Search
Machines 4 World is an essential technical tool that aims to give the best solution to all the needs that occur around your company
 
 
 

Emmegi 3 axis CNC Phantomatic T4 A machining centre

General Specifications:

  : ME0520114
  Type: CNC 3 axis
  Manufacturer: Emmegi
  Model: Phantomatic T4 A
  Manufacturing date: 2008

Images
Emmegi 3 axis CNC Phantomatic T4 A machining centre
 
Emmegi 3 axis CNC Phantomatic T4 A machining centre
 
Emmegi 3 axis CNC Phantomatic T4 A machining centre
 
Emmegi 3 axis CNC Phantomatic T4 A machining centre Emmegi 3 axis CNC Phantomatic T4 A machining centre
 
Emmegi 3 axis CNC Phantomatic T4 A machining centre
 
Emmegi 3 axis CNC Phantomatic T4 A machining centre
 
Emmegi 3 axis CNC Phantomatic T4 A machining centre Emmegi 3 axis CNC Phantomatic T4 A machining centre
 
Emmegi 3 axis CNC Phantomatic T4 A machining centre
 
Emmegi 3 axis CNC Phantomatic T4 A machining centre
 
Emmegi 3 axis CNC Phantomatic T4 A machining centre Emmegi 3 axis CNC Phantomatic T4 A machining centre
 
Emmegi 3 axis CNC Phantomatic T4 A machining centre
 
 

The “Phantomatic T4 A” machining centre has a physical protective guard, which totally protects the operator and contributes to reduce the noise level.

The protection allows however an easy and quick access to the support clamps for the profile loading/ unloading and a pratical access to the machine’s back in case of any eventual maintenance request.

 

Machine’s programming:

The “Phantomatic T4 A” is quickly and easily programmable, thanks to a special software package developed by Emmegi. Such software, operating in Windows 2000 environment, is one of the most important features of our working centre, allowing the operator to program the machining in a simple and intuitive way.

 

Clamps positioning:

After the programming, the machine carries out the automatic positioning of the no. 4 pneumatic clamps on the X-axis by means of a pneumatic device installed on the side of the spindle aggregate.

This allows the operator to lay on the standard machine one profile (2 profiles with optional software), to be machined against the relevant pneumatic reference stop, with the certainty of having the clamps always in the right position.

 

Profiles positioning:

 The Phantomatic T4 A machining centre is equipped with n. 2 pneumatcially driven drop-away reference stops, designed “x1” and “x2”, located on the left side of the machine and no. 2 pneumatically driven drop-away reference stops, designated “x3” and “x4”, located on the right side of the machine.

The reference stop can be selected by the operator during the programming, to lay the profile in the most convenient position for the machining, as described in the following table.

Functioning mode:
Totally automatic: After the operator start, the Phantomatic T4 executes all programmed machining automatically.
Workable profile cross section with vertical milling tool only:
(milling tool length 90mm) (W x H): 280 x 200 (280 x 150)* mm
Workable profile cross section on 3 faces with horizontal double milling head (milling tool length 45mm) and vertical milling tool (milling tool length 90mm) (W x H): 165 x 200
(165 x 150)*
*: values to be considered when the system to automatically rotate the horizontal spindle is installed on the machine
Milling tool only:
Max. workable length with vertical tool: 3400mm (6800 mm with profile shifting)
Axis stroke:
□ X (longitudinal axis): 3400mm
□ Y (transversal axis):      300mm    
□ Z (vertical axis):           350mm
Positioning speed:
□ X 56 m/min
□ Y 22.5m/min  
□ Z 22.5 m/min
Aix acceleration:
□ X: 4,68 m/sec²
□ Y: 1,84 m/sec²
□ Z:  1,84m/sec²
Electrical spindle characteristics:
□ Power in S1 service: 5.5KW
□ Speed: variable from 500 to 18.000rpm
□ Collect chuck: ISO 30 DIN 69871
□ Shank: special design
□ The spindle cone is kept clean by a jet of air during tool change
Tools lubrication:
The “Phantomic T4 A” is equipped with a tool magazine, which slides horizontally, and has six slots available to accommodate:
□ No. 1 2-way angular spindle (max width 239mm)
□ No. 4 ISO 30 collet chucks
□ No. 1 Blade holder with blade up to 180mm or no. 1 ISO 30 chuck
The tool change occurs automatically driven by the CNC.
The <>  machining centre is composed by:
Physical protective system:
Total protection for the 4 machine’s sides, including front sliding protective access, and wide opening back hatches to allow an easy access to the machine. 
Load-bearing base, of electrically welded rugged heat treated steel construction with length sufficient to allow stability and accuracy during the working cycle. Complete with work table, slideways for axis travel. Motorisation system X,Y and Z axis with brushless motor and measure reading by encoder on the rack. Swarf conveyor in the base.
Control unit
Consisting of:
□ CNC-PC CELERON 850 MHz (or higher) with Windows ® 2000, including colour monitor TFT 12”, international keyboard, RAM256 Mbytes memory, 10 Gigabytes Hard Disk, driver for the Floppy Disk 3,5” of 1.44 Mbytes, international mouse. CD ROM driver, RJ45 network connection card.
□ Electrical cabinet with ventilation/cooling system.
□ Software fully developed by Emmegi ; Phantomatic-Cam Editor Drill, two copies.
Machine delivered with:
□ 1 collet ERC32 (Article 257009)
□ 1 single lip carbide tipped cutter Ø 8mm (Article 255825)
□ 1 wrench (Article 257611)
Dimensions, Weight and supply: 
L x W x H: 5’472 x 1’900* x 2’200mm
* control console excluded
Weight: 1’820kg
Air pressure: 6-8 bar
Air consumption: 87NI/min
Installed power: 7kw
Max. absorbed  16A
Current at 380V
 
Emmegi 3 axis CNC Phantomatic T4 A machining centre
   

I AM A INVESTOR AND/ OR ENTREPRENEUR

machines4world.com

Used Industrial Machinery

M4W is a company formed by a young and dynamic team of professionals with a 100% technical and commercial training in the field of Industrial Engineering and it has a long proven experience in different sectors of activity related to the manufacturing and the industrial world in general.

The most important aspects of its human capital are the high technical ability, the broad experience in project management of sales and liquidation of industrial assets as well as a deep industry knowledge and skills when it comes to designing the sales force that best suits the needs of the project.

Liquidation of factories
Liquidation of factories


See more »

 
Newsletter

Enter your e-mail address to receive information about the latest news that occur around machines4world.

Machines4World Polígono La Serna - Centro de Negocios - Ciudad Agroalimentaria c/c, 31500 Tudela (Navarra),
Spain
Tel: 0034 948415757 / Fax: 0034 948415758 / Email: info@machines4world.com
Webpages design